Covid-19 Update: We have now resumed prepaid orders and deliveries. Click here for more details.

There may be delays with deliveries of orders depending on the situation in your pin code, especially in containment zones. You can reach out to us at help@ebco.in with questions about your orders.

Computer Monitor Arm

QUICK OVERVIEW

  • This product is mounted on a table top (grommet mounting) with a single or double arm.
  • Suitable for standard monitors of 15 inches to 27 inches.
  • Maximum load capacity - Computer Monitor Arm - Single: 8 kilograms; Computer Monitor Arm - Double - 8 kilograms per arm.
  • Maximum load capacity - Computer Monitor Arm – Single Extension: 8 kilograms; Computer Monitor Arm – Double Extension: 8 kilograms per arm.
  • Ergonomically designed for comfort and easy to fit, simultaneous adjustments possible.
  • Compatible for Video Electronics Standards Association (VESA) sizes of 75mm width x 75mm height and 100mm width x 100mm height.
  • Die cast for good aesthetics.
  • It can be rotated left and right, as well as tilted up and down with a single knob.
  • Functional design combined with elegant look
  • Stable & durable design
  • Available in Anthracite colour.

Availability: In stock

2,068.00

Regular Price:2,350.00

Check availability at  

* Required Fields

Qty:

  • Reload captcha
  • Model

    Code

    Finish

    Computer Monitor Arm Single Screen

    CMA-SA

    Anthracite

    Computer Monitor Arm Double Screen

    CMA-DA

    Anthracite

    Computer Monitor Arm – Single Extended Arm CMA-EA-AT Anthracite
    Computer Monitor Arm – Double Extended Arm CMA-DEA-AT Anthracite
    Single Arm
    • Fix the Diagonal Arm onto the Base with Cap & M6 screw as shown in Fig.1.
    • Tighten the grub screw shown in Fig. 1a.
    • Drill Ø10.5 mm hole through out on table top on the desired position & Mount the Base as shown in Fig.2.
    • Screw the Flat Screen to the Mounting plate as shown in Fig.3.
    • Pressure can be adjusted by tightening & loosening the screw as shown in Fig.4.

    Double Arm
    • Drill Ø10.5mm hole through out on table top on the desired position & Mount the Base as shown in Fig.1.
    • Slide the double Arm Base onto the Base & tighten the grub screw as shown in Fig. 2.
    • Fix the Diagonal Arm onto the Double Arm Base with Cap & M6 screw as shown in Fig. 3. & tighten the grub screw as shown in Fig 3a.
    • Screw the Flat Screen to the Mounting plate as shown in Fig. 4.
    • Pressure can be adjusted by tightening & loosening the screw as shown in Fig. 5.


    Computer Monitor Arm – Single Extended Arm:
  • Fix the Extended Arm onto the Base with Cap & M6 screw as shown in Fig. 1.
  • Tighten the grub screw shown in Fig. 1a.
  • Drill Ø 10.5mm hole through out on table top on the desired position & Mount the Base as shown in Fig. 2.
  • Fix the Diagonal arm onto Extended Arm with Cap & M6 screw & then Tighten the grub screw as shown in Fig. 3.
  • Screw the Flat Screen to the Mounting plate as shown in Fig. 4.
  • Pressure can be adjusted by tightening and loosening the screw as shown in Fig 5.
  • Tighten the screw to adjust the load of the monitor as shown in Fig.6.


  • Computer Monitor Arm – Double Extended Arm:
  • Drill Ø10.5mm hole through out on table top on the desired position & Mount the Base as shown in Fig.1.
  • Slide the double Arm Base onto the Base & tighten the grub screw as shown in Fig. 2.
  • Fix the Extended Arm onto the Double Arm Base with Cap & M6 screw as shown in Fig. 3. & tighten the grub screw as shown in Fig 3a.
  • Fix the Diagonal arm onto Extended Arm with Cap & M6 screw & then tighten the grub screw as shown in Fig. 4.
  • Screw the Flat Screen to the Mounting plate as shown in Fig. 5.
  • Pressure can be adjusted by tightening & loosening the screw as shown in Fig. 6.
  • Tighten the screws to adjust the load o the monitor as shown in Fig .7.
    • Please follow the fitting instructions carefully. Not following these instructions can lead to damage of your Monitor Screen as well as the product.
    • To clean when required, wipe with a dry cloth.
    • Do not clean, paint, engrave or use any chemicals on the product.
    • Our Products comes with a 12 month warranty against any manufacturing defects.
    • The warranty does not cover damages due to incorrect and inaccurate installation of the product.
    • For any guidance or help required with installation, please email us at help@ebco.in with your order number and a scanned copy of the invoice.
    • The warranty does not cover any usage of the product beyond its intended use and wear and tear in the natural course of product usage.
    • The warranty is only valid against an original invoice received at the time of purchase.
    • All sales are final, except in the case of any manufacturing defects. For any manufacturing defects, we offer easy replacements.
    • In the case of transit damage, it rests solely at the discretion of Ebco to process any replacements on a case-by-case basis.
    • In case, you receive a defective or damaged product , please contact us within 7 days of receipt. Email us a few photographs with the order number and a scanned copy of the invoice to help@ebco.in.
    • We will assess the damage and revert within 24 hours. We will either arrange to collect the product and send you a replacement free of charge or just send you a replacement part.